Custom Rotational Molding

Custom Rotational Molding: Your Part, Made to Order

You have a part in mind. Nobody makes it — not in the size you need, not in the shape you need, not at a quantity that makes sense for you. That is not a dead end. It is the normal starting point for every custom rotomolded part we make.

Send us the part itself, or a 3D file, and we will make the mold and run your parts — in our own factories in China, since 2013. Mold in 3–6 weeks. A sample in your hands 3 days after the mold is confirmed. Minimum order 50 pieces. Quote in 24 hours.

Custom rotomolded fuel tank made by Superpower Lights in China

The Part You Need Doesn't Exist Yet

Most buyers who find us have already tried the easy routes, and the easy routes have already failed them.

The off-the-shelf part is close but wrong: a tank that is the right volume and the wrong shape, a case that fits the equipment and not the vehicle, a housing with the lid hinge exactly where the terminals sit. You can live with "close" for a week. You cannot live with it for a product run.

The supplier who will make it custom wants a volume you do not have yet, or a mold price that only makes sense if you order ten thousand pieces in year one. Or the supplier will make the mold — and keep it, so your next order starts with another negotiation instead of another shipment.

And then there is the quieter problem, the one buyers only talk about after it has already cost them money: the part arrives, and it is almost right. The wall is thin at the corner. The fitting is in the wrong place.

The lid does not close with gloves on. By then the mold is made, the money is spent, and the fix is a second mold.

None of this is your fault. A custom part is a chain of decisions — material, wall thickness, fittings, mounting, size — and every one of them has to be made before the mold exists, because after the mold exists, every one of them is expensive to change.

What you need is not a supplier who takes an order. You need a supplier who asks the right questions while the mold is still on the drawing board.

How Your Part Goes From a Sample to a Shipment

Here is how an order actually runs with us. Five steps, no mystery, and you hold a real part in your hands before you commit to bulk.

11

Step 1 — You send the starting point

A physical sample, or a 3D design file. You do not need a perfect drawing. Tell us what the part is for, how big it needs to be, how many you need per order and per year, and whether you need inserts, a particular fitting, or assembly.

Within 24 hours you get a real quote, with a mold lead time attached — not a promise to get back to you.

23

Step 2 — We build your mold

Aluminum, iron or steel, chosen for your part and the volumes you expect. Generally 3–6 weeks, depending on size and complexity. We check the mold against your drawing before we cut it, because a mold mistake is the most expensive mistake in this business.

34

Step 3 — You approve a real sample

Once the mold is confirmed, we run your sample and send it to you within 3 days. You hold the actual part — the wall thickness, the fit, the finish — and you tell us whether it is right. We do not start bulk production until you say yes.

45

Step 4 — We run the bulk order

Generally 30 days. Every batch is checked against your approved sample: dimensions, wall thickness, surface finish, and fit. A part that does not match the sample does not ship.

56

Step 5 — We ship to your schedule

Tell us when you need the goods and where they are going, and we plan production backwards from your date.

That is the whole process. The mold is yours, the sample comes first, and nothing about the price or the timing is left vague — because a mold is the one place where vague gets expensive.

What We Have Already Made, and the Factory Behind It

We run 4 factories in China — 20,000+ m² in total, 350 people, 25 rotomolding machines — and we can make parts up to 4 m. Rotomolding is not a side line for us. It is what we do every day, since 2013.

Here is a small part of what we have already made molds and parts for. These are examples of work we have done — shown so you can see what a rotomolded part can be, not as finished products for sale:

Fuel tanks and diesel/urea tanks

one seamless piece, no joint for fuel to find.

Read the article

Battery housings and fenders

shells that take knocks, flex instead of cracking, and fit around terminals and mounting bolts.

Read the article

Drone cases and protective cases

hard shells built around the equipment inside them.

Read the article

Playground slides and climbing equipment

big, smooth, curved shapes that live outside for years.

Read the article

Water equipment and anti-collision barriers

buoys, floats, and barriers that take impact and weather.

Read the article

If your part is large, hollow, and meant to live a hard life outside, rotational molding is usually the right process — and we will tell you honestly when it is not. We would rather lose one order than make you a mold you will regret.

What You Get, in Writing, Before We Start

Everything below is the deal, stated plainly before any money moves. If a term matters to you, ask us to put it in writing — we do.

Starting point

Your physical sample, or your 3D design drawing

What we make

A custom rotational molding mold, built for your part — then your parts, run to order

Mold lead time

Generally 3–6 weeks, depending on size and complexity

Mold fee — Mold fee refund

You pay the mold fee, and you own the mold. Refunded when your cumulative orders reach 10,000 pieces or more

Sample

Sent to you for confirmation within 3 days after the mold is confirmed

MOQ

50 pcs

Bulk production

Generally 30 days

Warranty

24 months on rotomolded shells

Materials

LLDPE, HDPE, XLPE — chosen for your part

Mold material

Aluminum, iron or steel

Max part size

Up to 4 m

Quote

Within 24 hours

One point worth saying twice: you own the mold. Your design stays your design. Nobody charges you again to use it, and nobody else runs parts from it. And if your orders build up to 10,000 pieces or more, we refund the mold fee.

The Four Questions Every Buyer Asks Us

The mold fee is the risk. What if the part doesn't work out?

That is exactly why the sample comes before the bulk order. You hold the real part in your hands — the wall, the fit, the finish — and you approve it before we run a single production piece.

And the mold is yours either way: if the part works, you reorder from your own mold; if you need a design change later, we change your mold, we do not start over with a new negotiation.

50 pieces is still a lot for a first order.

Fifty pieces is the smallest run that makes a custom mold worth cutting, and it is the same minimum whether your part is a fuel tank or a fender. If you genuinely need fewer, tell us — but be honest with yourself too: a mold is an investment, and it only pays back across a real order.

We would rather you order 50 pieces you can sell than 500 you cannot.

How do I know the quality will be consistent?

Because nothing ships until it matches the sample you approved. Every batch is checked against that sample — dimensions, wall thickness, surface finish, fit. A part that does not match does not ship.

And the process itself helps: rotational molding makes the part in one seamless piece, so there is no joined seam to split, and the wall comes out even.

Three to six weeks for a mold — is that slow?

It is the honest time to cut a mold properly and check it against your drawing. A mold that costs far less than an injection mold, and a wall that comes out even, are the trade you are making — and for a large, hollow part, it is usually the right trade.

What we will not do is promise you a mold in two weeks and then deliver a mold that warps after a few hundred shots. Ask any supplier, including us, how the mold is made — and ask to see a real part, not just a render.

Send Us Your Part, Get a Quote in 24 Hours

You do not need a perfect drawing to start. Send us your sample or your 3D file, and tell us four things: what the part is for, how big it needs to be, how many you need, and when you need it. Within 24 hours you will have a quote and a mold lead time.